Engineered Wood

Thermal fluid for wood manufacturing

The construction industry requires a variety of engineered materials for house building and other applications, such as plywood, panelling, oriented strand board (OSB) and medium density fibreboard (MDF). The process of wood manufacturing requires enormous quantities of heat, so heat transfer fluids play an important role.

What does wood manufacturing involve?

MDF and other forms of engineered wood are processed by breaking down hardwood and softwood into wood fibres. These fibres are then bonded with wax and resin adhesives and formed into mats.

The mat is then compressed into strips and heated to extreme temperatures by a heat transfer system. The heat activation from very high temperatures generated in the system cures the wood and adhesives, creating the wood-based products.

Why should I use a thermal fluid for wood manufacturing?

Wood manufacturing requires enormous heat loads and a fluid that can operate at high temperatures for long periods at a time. You must prioritise safety, maintenance and output to improve uptime and increase employee safety. Heat transfer fluids are safer in these applications because they offer the precise temperature control, thermal stability and efficiency required in these large applications.

How do I choose a heat transfer fluid?

Industrial heating in wood manufacturing requires a heat transfer fluid that can work at specific temperatures for prolonged periods of time. When choosing a heat transfer fluid, you should consider temperature range and thermal stability to determine if the fluid will ensure safe and efficient operation in large applications.

Are there any thermal oil regulations?

The Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) and the ATEX Directive must be adhered to by anyone that uses heat transfer fluids. These regulations instruct employers to carry out regular assessments on the fire and explosion risk of any work activities involving dangerous substances, including thermal fluid and synthetics.

Manufacturers should ensure that risk is managed, their site is always safe, and staff are knowledgeable on operating heat transfer systems in order to comply with DSEAR and provide a safe working environment for all employees.

Our range of thermal fluid for wood manufacturing

Global Heat Transfer has worked with engineers in the wood manufacturing sector for over 25 years to understand what fluids best suit these applications.

Globaltherm® J

This superior, high performance fluid is suitable for a range of industrial processes because it has excellent thermal stability to protect against accidental overheating.

Globaltherm® J is recommended for use in a temperature range from -80 degrees Celsius up to a maximum bulk temperature of 315 degrees Celsius in liquid pages systems.

Globaltherm® M

This high performing and energy efficient heat transfer fluid (HTF) is useful for a range of industrial applications that require consistent operating temperatures. It operates at a temperature range of -10 to 320 degrees Celsius.

Globaltherm® M has excellent oxidation and thermal stability to ensure manufacturers can use the fluid at high temperature for extended periods.

Globaltherm® MXT

This non-toxic mineral based heat transfer fluid is used for operating at bulk temperatures between -7 and 320 degrees Celsius in both open and closed circulation.

Globaltherm® MXT also contains a highly resilient blend of additives that are resistant to sludging to ensure long-lasting and trouble-free service when managed correctly. It is also resistant to the oxidation and thermal cracking found in many industrial processing environments such as wood, paper and textiles manufacturing.

How long will the thermal oil last?

All thermal fluids will degrade over time because they operate at such high temperatures. At these operating temperatures, the bonds that exist between hydrocarbon chains will start to break and form shorter (commonly referred to as ‘light-ends’) and longer chained hydrocarbons (‘heavy-ends’).

The build-up of light-end components is a potential fire risk because they decrease the ignition temperature of the HTF. The accumulation of heavy ends results in the formation of sticky carbon deposits or sludge and can be monitored by analysing the carbon residue levels in a system operating with thermal fluid.

Without proactive fluid sampling, there can also be a carbon or acid build up in the system, which can lead to a lack of flow or hotspots. Carbon is a natural insulator, so you can encounter problems with uneven heat transfer that impacts production efficiency and increases energy costs.

How can I maintain a thermal fluid?

Continual fluid sampling and monitoring of the fluid can help to extend its lifespan.  Maintenance engineers should take a hot, closed sample of the fluid to ensure it can give a representative view of what is happening to the fluid inside the system.

Manufacturers should implement a preventative maintenance programme to extend fluid life and prevent downtime. As well as regular sampling, manufacturers should complete visual checks of the system itself to ensure the equipment is operating safely and efficiently.

How do I analyse a fluid sample?

After taking a correct sample, the engineers at Global Heat Transfer can interpret the data to understand the condition of the fluid and if any interventions are required to improve the condition of the fluid.

Most thermal fluid companies offer a seven-point test to determine the overall condition of the fluid, but we offer more extensive analysis. Our eleven-point test looks at the sample in greater detail to ensure the results completely reflect reality.

Where can I get advice about thermal fluid maintenance?

We can help you create the right programme for your facility. As a part of Thermocare, our condition based thermal fluid lifecycle maintenance programme, our experts will work with you to improve accuracy when monitoring fluid, train staff on effective maintenance and organise maintenance schedules.

Our engineers can also provide support on-site and on the phone to help maintain production and keep the system running.

Have you got any more questions about thermal fluid for wood manufacturing?

We have over 25 years of experience in providing high quality heat transfer fluid and supporting system designers, plant managers and maintenance engineers in wood manufacturing.

Call us on +44 (0)1785 760 555 to speak to our technical support team or you can submit your enquiry on our contact form page.